Welcome to Fiver Autoparts Co., Ltd — OEM & aftermarket brake and electrical systems

  1. Home
  2. Products
  3. ABS Pump / Brake Booster Pump
  4. ABS Brake Booster Pump STC2784 for Range Rover P38 1995-

ABS Brake Booster Pump STC2784 for Range Rover P38 1995-

ABS Brake Booster Pump STC2784 for Range Rover P38 1995-

ABS Pump / Brake Booster Pump

ABS Brake Booster Pump STC2784 for Range Rover P38 1995-

OE Part No. STC2784
OE qualityStable supply
Part name
ABS Pump / Brake Booster Pump
Part number
STC2784
Application
Range Rover P38 1995-
Category
ABS Pump / Brake Booster Pump

ABS pump / brake booster pump for the Range Rover P38 4.0/4.6L (1995-2002). In the ABS unit, the pump restores pressure lost from the brake system when the hydraulic valves release pressure to prevent wheel slip, and the ABS controller regulates the pump to maintain optimum pressure and minimise slippage.

Brake Parts

ItemValue
Part nameABS Pump / Brake Booster Pump
Part numberSTC2784
  • Range Rover P38 4.0/4.6L 1995-2002

Signs that may indicate a failed ABS pump:

  • ABS warning light or engine light: an orange ABS light on the dashboard typically points to a pump problem; on older vehicles the check engine light may also come on.
  • Unresponsive brake pedal: a pedal that is less responsive than before or takes longer to depress can signal pump failure and should be serviced promptly.
  • Harder braking: needing more force than usual to apply the brakes, or brakes locking up during normal driving, especially with strange clicking noises.
  • Speedometer showing wrong speed: a speedometer reading the wrong speed or 0 MPH may also indicate an ABS pump problem, even without a dashboard light.

Brake Parts

About ABS pumps and brake booster pumps

ABS units have a pump that helps maintain the correct pressure in the hydraulic brake system. The ABS ECU receives input from the wheel-speed sensors to detect wheel slip and signals the hydraulic valves to release pressure; the pump in the ABS unit then restores the pressure lost in the brake system, and the ABS controller regulates the pump to keep the pressure at the required level and reduce slip.

Signs of a failing ABS pump, from the source material:

  • The ABS warning light or check engine light comes on. An orange ABS light usually indicates a pump problem that needs attention; on older vehicles the check engine light may also come on.
  • The brake pedal is unresponsive or takes longer than usual to depress.
  • The brakes need more force than usual, or lock up during normal driving.
  • The speedometer shows the wrong speed or reads 0 mph.
  • Strange clicking noises may be heard.

The source material groups the common faults of these pumps as abnormal noise, no pressure or poor oil absorption, low flow rate, and oil leakage.

Related Products