Welcome to Fiver Autoparts Co., Ltd — OEM & aftermarket brake and electrical systems

  1. Home
  2. Products
  3. Hydraulic Brake Booster / Hydroboost Units
  4. Brake Booster-Hydraulic 5C3Z2005AA for Ford F-250 Super Duty 2005-2010

Brake Booster-Hydraulic 5C3Z2005AA for Ford F-250 Super Duty 2005-2010

Brake Booster-Hydraulic 5C3Z2005AA for Ford F-250 Super Duty 2005-2010

Hydraulic Brake Booster / Hydroboost Units

Brake Booster-Hydraulic 5C3Z2005AA for Ford F-250 Super Duty 2005-2010

OE Part No. 5C3Z2005AA
OE qualityStable supply
Part name
Hydraulic Brake Booster / Hydroboost Units
Part number
5C3Z2005AA
Application
Ford F-250 Super Duty 2005-2010
Category
Hydraulic Brake Booster / Hydroboost Units

Key specifications

  • Part name: Hydraulic brake booster, Hydro-boost Units, Hydrobooster Frenos
Part number
5C3Z2005AA
6C3Z2005AA
7C3Z2005AA

Hydro-boost system

MakeModelYear
FordF-250 Super Duty2005-2010
FordF-350 Super Duty2005-2010
FordF-4502009
FordF-450 Super Duty2005-2010
FordF-550 Super Duty2005-2010

Additional information

Try not to remanufacture/rebuild a used hydro-boost: the inside is too precision; one hole inside is sealed just by two metals, with no rubber seals.

Brake parts

About hydraulic brake boosters (hydro-boost)

A hydraulic brake booster, also called a hydro-boost, is part of a vehicle's braking system. It is designed to make the brake pedal easier to press and the vehicle easier to stop. Instead of engine vacuum, it uses hydraulic pressure from the power steering pump or a separate hydraulic pump; that pressure amplifies the force the driver applies to the brake pedal. When the pedal is depressed, hydraulic pressure increases and raises the force applied to the master cylinder, which allows faster and more effective braking.

Compared with a vacuum brake booster:

  • Power source: a vacuum booster uses vacuum from the engine; a hydraulic booster uses hydraulic pressure from the steering pump or a separate pump.
  • Performance: hydraulic pressure is generally more consistent, giving a more consistent pedal feel and better brake response.
  • Brake assist: a hydraulic booster can provide more assist, which is useful on heavy vehicles or vehicles with larger engines.
  • Vacuum dependency: a hydraulic booster does not depend on engine vacuum, so a vacuum leak or low engine vacuum does not affect it.

Service note from the source material: a used hydro-boost is not a good rebuilding candidate. Its internal clearances are precision parts and one passage is sealed by metal-to-metal contact without rubber seals; wear increases clearance and can push dimensions out of tolerance and cause failure.

Frequently Asked Questions

What part numbers are listed for this hydraulic brake booster?

The listed part numbers are 5C3Z2005AA, 6C3Z2005AA, and 7C3Z2005AA.

Which Ford models and years is this brake booster listed for?

It is listed for Ford F-250 Super Duty 2005-2010, Ford F-350 Super Duty 2005-2010, Ford F-450 2009, Ford F-450 Super Duty 2005-2010, and Ford F-550 Super Duty 2005-2010.

Why does the source advise against remanufacturing or rebuilding a used hydro-boost?

The source advises against remanufacturing or rebuilding a used hydro-boost because the inside is too precision, with one hole sealed only by two metals and no rubber seals.

Related Products