Welcome to Fiver Autoparts Co., Ltd — OEM & aftermarket brake and electrical systems

  1. Home
  2. Products
  3. Hydraulic Brake Booster / Hydroboost Units
  4. HC3Z2005D Hydroboost Unit for Ford F-450 Super Duty 2017-2020

HC3Z2005D Hydroboost Unit for Ford F-450 Super Duty 2017-2020

HC3Z2005D Hydroboost Unit for Ford F-450 Super Duty 2017-2020

Hydraulic Brake Booster / Hydroboost Units

HC3Z2005D Hydroboost Unit for Ford F-450 Super Duty 2017-2020

OE Part No. HC3Z2005D
OE qualityStable supply
Part name
Hydraulic Brake Booster / Hydroboost Units
Part number
HC3Z2005D
Application
Ford F-450 Super Duty 2017-2020
Category
Hydraulic Brake Booster / Hydroboost Units
ItemValue
Part nameHydraulic brake booster, Hydro-boost Units, Hydrobooster Frenos
Part numberHC3Z2005D
Part numberPC3Z2005B
Part number0204777604
Part number52-8000
MakeModelYear
FordF-450 Super Duty2017-2020
FordF-550 Super Duty2017-2019

The image below shows how the unit connects with the steering pump and gearbox.

Hydro-boost system

Do not remanufacture/rebuild a used hydro-boost: its internals are precision-made, and one hole is sealed only by two metal surfaces with no rubber seals. Used parts can increase hole clearance and push dimensions out of tolerance, causing failure.

Brake parts

About hydraulic brake boosters (hydro-boost)

A hydraulic brake booster, also called a hydro-boost, is part of a vehicle's braking system. It is designed to make the brake pedal easier to press and the vehicle easier to stop. Instead of engine vacuum, it uses hydraulic pressure from the power steering pump or a separate hydraulic pump; that pressure amplifies the force the driver applies to the brake pedal. When the pedal is depressed, hydraulic pressure increases and raises the force applied to the master cylinder, which allows faster and more effective braking.

Compared with a vacuum brake booster:

  • Power source: a vacuum booster uses vacuum from the engine; a hydraulic booster uses hydraulic pressure from the steering pump or a separate pump.
  • Performance: hydraulic pressure is generally more consistent, giving a more consistent pedal feel and better brake response.
  • Brake assist: a hydraulic booster can provide more assist, which is useful on heavy vehicles or vehicles with larger engines.
  • Vacuum dependency: a hydraulic booster does not depend on engine vacuum, so a vacuum leak or low engine vacuum does not affect it.

Service note from the source material: a used hydro-boost is not a good rebuilding candidate. Its internal clearances are precision parts and one passage is sealed by metal-to-metal contact without rubber seals; wear increases clearance and can push dimensions out of tolerance and cause failure.

Related Products