Welcome to Fiver Autoparts Co., Ltd — OEM & aftermarket brake and electrical systems

  1. Home
  2. Products
  3. Hydraulic Brake Booster / Hydroboost Units
  4. Hydro-boost Units 15183760 for Silverado 2500 03-07

Hydro-boost Units 15183760 for Silverado 2500 03-07

Hydro-boost Units 15183760 for Silverado 2500 03-07

Hydraulic Brake Booster / Hydroboost Units

Hydro-boost Units 15183760 for Silverado 2500 03-07

OE Part No. 15183760
OE qualityStable supply
Part name
Hydraulic Brake Booster / Hydroboost Units
Part number
15183760
Application
Silverado 2500 03-07
Category
Hydraulic Brake Booster / Hydroboost Units

Key specifications

  • Part Name: Hydraulic brake booster, Hydro-boost Units, Hydrobooster Frenos
Part Number
15854059
15126867
15167550
15183760
15212480
15814411
15218247
MakeModelYear
ChevroletAvalanche 1500/25002003-2006
ChevroletSilverado 1500/2500/35002003-2007
ChevroletSuburban 25002003-2006
GMCSierra 1500/2500/35002003-2007
GMCYukon Xl 25002003-2006

Hydro-boost system

Additional information

Avoid remanufacturing or rebuilding a used hydro-boost: the internals are too precision-made, and one internal hole is sealed by two metals with no rubber seals.

Brake parts

About hydraulic brake boosters (hydro-boost)

A hydraulic brake booster, also called a hydro-boost, is part of a vehicle's braking system. It is designed to make the brake pedal easier to press and the vehicle easier to stop. Instead of engine vacuum, it uses hydraulic pressure from the power steering pump or a separate hydraulic pump; that pressure amplifies the force the driver applies to the brake pedal. When the pedal is depressed, hydraulic pressure increases and raises the force applied to the master cylinder, which allows faster and more effective braking.

Compared with a vacuum brake booster:

  • Power source: a vacuum booster uses vacuum from the engine; a hydraulic booster uses hydraulic pressure from the steering pump or a separate pump.
  • Performance: hydraulic pressure is generally more consistent, giving a more consistent pedal feel and better brake response.
  • Brake assist: a hydraulic booster can provide more assist, which is useful on heavy vehicles or vehicles with larger engines.
  • Vacuum dependency: a hydraulic booster does not depend on engine vacuum, so a vacuum leak or low engine vacuum does not affect it.

Service note from the source material: a used hydro-boost is not a good rebuilding candidate. Its internal clearances are precision parts and one passage is sealed by metal-to-metal contact without rubber seals; wear increases clearance and can push dimensions out of tolerance and cause failure.

Frequently Asked Questions

Which part numbers are listed for these Hydro-boost Units?

The listed part numbers for these Hydro-boost Units are 15854059, 15126867, 15167550, 15183760, 15212480, 15814411, and 15218247.

What does the source advise about remanufacturing or rebuilding a used hydro-boost?

The source advises not to remanufacture or rebuild a used hydro-boost because the inside is too precision and one hole inside it is sealed just by two metals with no rubber seals.

Related Products