Welcome to Fiver Autoparts Co., Ltd — OEM & aftermarket brake and electrical systems

  1. Home
  2. Products
  3. Hydraulic Brake Booster / Hydroboost Units
  4. Power brake booster 19286838 for Buick Electra

Power brake booster 19286838 for Buick Electra

Power brake booster 19286838 for Buick Electra

Hydraulic Brake Booster / Hydroboost Units

Power brake booster 19286838 for Buick Electra

OE Part No. 19286838
OE qualityStable supply
Part name
Hydraulic Brake Booster / Hydroboost Units
Part number
19286838
Application
Buick Electra
Category
Hydraulic Brake Booster / Hydroboost Units

The hydraulic brake booster (hydro-boost) is part of a vehicle's braking system. It works with hydraulic pressure from the power steering pump or a separate hydraulic pump and uses that pressure to amplify the force the driver applies to the brake pedal. When the pedal is depressed, hydraulic pressure increases, which increases the force applied to the master cylinder — enabling faster, more effective braking, particularly when stopping suddenly or applying maximum braking force. It also improves brake feel and response, giving the driver more control over the braking system.

The illustration below shows how it connects with the steering pump and gear box.

Hydro-boost system

ItemValue
Part nameHydraulic brake booster, Hydro-boost Units, Hydrobooster Frenos
Part number19286838
MakeModelYear
BuickElectra1981-1985
BuickEstate Wagon1981-1983
BuickLesabre1981-1985
CadillacDeville1980-1984
CadillacFleetwood1980-1985
ChevroletCaprice1981-1985
ChevroletImpala1981-1985
Oldsmobile981981-1984
OldsmobileCustom Cruiser1981-1985
OldsmobileDelta 881981-1985
PontiacBonneville1981
PontiacCatalina1981
PontiacLaurentian1981
PontiacParisienne1981-1985

Differences and advantages compared with vacuum boosters

AspectComparison
Power sourceThe vacuum brake booster relies on vacuum pressure generated by the engine to assist in depressing the brake pedal; hydraulic brake boosters use hydraulic pressure from the power steering pump to provide brake assistance.
PerformanceHydraulic brake boosters generally provide better braking performance; the hydraulic pressure is generally more consistent and reliable, resulting in a more consistent brake pedal feel and improved brake response.
Brake assistA hydraulic brake booster can provide more brake assist, which is especially beneficial on heavy vehicles or vehicles with larger engines that may require extra braking power.
Engine vacuum dependencyVacuum brake boosters depend on sufficient engine vacuum to operate effectively; a vacuum leak or insufficient engine vacuum may affect performance. Hydraulic brake boosters are not dependent on engine vacuum, making them more reliable where engine vacuum may be insufficient.

Note: Try not to remanufacture or rebuild a used hydro-boost. The inside of the hydro-boost is too precision — one hole inside it is sealed only by two metals, with no rubber seals. Used parts make the hole clearance bigger and overall dimensions might become out of tolerance, which can then cause a failure.

Brake parts

About hydraulic brake boosters (hydro-boost)

A hydraulic brake booster, also called a hydro-boost, is part of a vehicle's braking system. It is designed to make the brake pedal easier to press and the vehicle easier to stop. Instead of engine vacuum, it uses hydraulic pressure from the power steering pump or a separate hydraulic pump; that pressure amplifies the force the driver applies to the brake pedal. When the pedal is depressed, hydraulic pressure increases and raises the force applied to the master cylinder, which allows faster and more effective braking.

Compared with a vacuum brake booster:

  • Power source: a vacuum booster uses vacuum from the engine; a hydraulic booster uses hydraulic pressure from the steering pump or a separate pump.
  • Performance: hydraulic pressure is generally more consistent, giving a more consistent pedal feel and better brake response.
  • Brake assist: a hydraulic booster can provide more assist, which is useful on heavy vehicles or vehicles with larger engines.
  • Vacuum dependency: a hydraulic booster does not depend on engine vacuum, so a vacuum leak or low engine vacuum does not affect it.

Service note from the source material: a used hydro-boost is not a good rebuilding candidate. Its internal clearances are precision parts and one passage is sealed by metal-to-metal contact without rubber seals; wear increases clearance and can push dimensions out of tolerance and cause failure.

Related Products