Welcome to Fiver Autoparts Co., Ltd — OEM & aftermarket brake and electrical systems

  1. Home
  2. Products
  3. Hydraulic Brake Booster / Hydroboost Units
  4. Power brake booster F6UZ2005AA for Ford E-350

Power brake booster F6UZ2005AA for Ford E-350

Power brake booster F6UZ2005AA for Ford E-350

Hydraulic Brake Booster / Hydroboost Units

Power brake booster F6UZ2005AA for Ford E-350

OE Part No. F6UZ2005AA
OE qualityStable supply
Part name
Hydraulic Brake Booster / Hydroboost Units
Part number
F6UZ2005AA
Application
Ford E-350
Category
Hydraulic Brake Booster / Hydroboost Units

Part name: Hydraulic brake booster, Hydro-boost Units, Hydrobooster Frenos

Part number
F6UZ2005AA
F7UZ2005AA
XC2Z2005AA
MakeModelYear
FordE-3501999
FordE-4502000-2001
FordEconoline Super Duty1997-1999

Hydro-boost system

Avoid remanufacturing/rebuilding a used hydro-boost: the internal parts are too precise, and one hole inside is sealed only by two metals, without rubber seals. Used parts can increase the hole clearance and may make overall dimensions out of tolerance, causing failure.

Brake parts

About hydraulic brake boosters (hydro-boost)

A hydraulic brake booster, also called a hydro-boost, is part of a vehicle's braking system. It is designed to make the brake pedal easier to press and the vehicle easier to stop. Instead of engine vacuum, it uses hydraulic pressure from the power steering pump or a separate hydraulic pump; that pressure amplifies the force the driver applies to the brake pedal. When the pedal is depressed, hydraulic pressure increases and raises the force applied to the master cylinder, which allows faster and more effective braking.

Compared with a vacuum brake booster:

  • Power source: a vacuum booster uses vacuum from the engine; a hydraulic booster uses hydraulic pressure from the steering pump or a separate pump.
  • Performance: hydraulic pressure is generally more consistent, giving a more consistent pedal feel and better brake response.
  • Brake assist: a hydraulic booster can provide more assist, which is useful on heavy vehicles or vehicles with larger engines.
  • Vacuum dependency: a hydraulic booster does not depend on engine vacuum, so a vacuum leak or low engine vacuum does not affect it.

Service note from the source material: a used hydro-boost is not a good rebuilding candidate. Its internal clearances are precision parts and one passage is sealed by metal-to-metal contact without rubber seals; wear increases clearance and can push dimensions out of tolerance and cause failure.

Related Products