Welcome to Fiver Autoparts Co., Ltd — OEM & aftermarket brake and electrical systems

  1. Home
  2. Products
  3. Hydraulic Brake Booster / Hydroboost Units
  4. Power brake booster 2501588C91 for International 1754

Power brake booster 2501588C91 for International 1754

Power brake booster 2501588C91 for International 1754

Hydraulic Brake Booster / Hydroboost Units

Power brake booster 2501588C91 for International 1754

OE Part No. 2501588C91
OE qualityStable supply
Part name
Hydraulic Brake Booster / Hydroboost Units
Part number
2501588C91
Application
International 1754
Category
Hydraulic Brake Booster / Hydroboost Units

Hydraulic brake booster (hydro-boost unit), also listed as Hydrobooster Frenos. Part number 2501588C91.

Hydro-boost system

ItemValue
Part nameHydraulic brake booster, Hydro-boost Units, Hydrobooster Frenos
Part number2501588C91
MakeModelYear
International17541988-1989
International18541988-1989
International19541988-1989
International36001992
International37001992
International38001990-1992
International3900FC1991-1992
International46001990-1992
International4600LP1990-1992
International4600UH1990
International47001990-1992
International4700LP1990-1992
International48001990-1992
International49001990-1992
International71001990-1992
InternationalS17531988-1989
InternationalS17541988-1989
InternationalS18531988-1989
InternationalS1853FC1988-1989
InternationalS18541988-1989
InternationalS19541988-1989

Avoid remanufacturing or rebuilding a used hydro-boost: the internals are too precision, and one hole inside is sealed by two metals only, with no rubber seals.

Brake parts

Brake parts

About hydraulic brake boosters (hydro-boost)

A hydraulic brake booster, also called a hydro-boost, is part of a vehicle's braking system. It is designed to make the brake pedal easier to press and the vehicle easier to stop. Instead of engine vacuum, it uses hydraulic pressure from the power steering pump or a separate hydraulic pump; that pressure amplifies the force the driver applies to the brake pedal. When the pedal is depressed, hydraulic pressure increases and raises the force applied to the master cylinder, which allows faster and more effective braking.

Compared with a vacuum brake booster:

  • Power source: a vacuum booster uses vacuum from the engine; a hydraulic booster uses hydraulic pressure from the steering pump or a separate pump.
  • Performance: hydraulic pressure is generally more consistent, giving a more consistent pedal feel and better brake response.
  • Brake assist: a hydraulic booster can provide more assist, which is useful on heavy vehicles or vehicles with larger engines.
  • Vacuum dependency: a hydraulic booster does not depend on engine vacuum, so a vacuum leak or low engine vacuum does not affect it.

Service note from the source material: a used hydro-boost is not a good rebuilding candidate. Its internal clearances are precision parts and one passage is sealed by metal-to-metal contact without rubber seals; wear increases clearance and can push dimensions out of tolerance and cause failure.

Related Products