Welcome to Fiver Autoparts Co., Ltd — OEM & aftermarket brake and electrical systems

  1. Home
  2. Products
  3. Hydraulic Brake Booster / Hydroboost Units
  4. Power brake booster BX2771552 for Ford L800

Power brake booster BX2771552 for Ford L800

Power brake booster BX2771552 for Ford L800

Hydraulic Brake Booster / Hydroboost Units

Power brake booster BX2771552 for Ford L800

OE Part No. BX2771552
OE qualityStable supply
Part name
Hydraulic Brake Booster / Hydroboost Units
Part number
BX2771552
Application
Ford L800
Category
Hydraulic Brake Booster / Hydroboost Units

Overview

Hydraulic brake booster / hydro-boost unit for the Ford models listed below.

SpecificationValue
Part NameHydraulic brake booster , Hydro-boost Units, Hydrobooster Frenos
Part NumberBX2771552
Part NumberE6HZ2005J
MakeModelYear
FordL8001984
FordL80001984-1988
FordL90001984-1997
FordLA90001990-1996
FordLLA90001992-1996
FordLLS90001994-1996
FordLN6001984-1985
FordLN7001984-1985
FordLN70001984-1997
FordLN8001984-1985
FordLN80001984-1997
FordLN90001984-1997

Hydro-boost system

Additional information

Try not to remanufacture or rebuild a used hydro-boost. The inside is precision-made; one hole inside is sealed by two metals alone, with no rubber seals.

Brake parts

About hydraulic brake boosters (hydro-boost)

A hydraulic brake booster, also called a hydro-boost, is part of a vehicle's braking system. It is designed to make the brake pedal easier to press and the vehicle easier to stop. Instead of engine vacuum, it uses hydraulic pressure from the power steering pump or a separate hydraulic pump; that pressure amplifies the force the driver applies to the brake pedal. When the pedal is depressed, hydraulic pressure increases and raises the force applied to the master cylinder, which allows faster and more effective braking.

Compared with a vacuum brake booster:

  • Power source: a vacuum booster uses vacuum from the engine; a hydraulic booster uses hydraulic pressure from the steering pump or a separate pump.
  • Performance: hydraulic pressure is generally more consistent, giving a more consistent pedal feel and better brake response.
  • Brake assist: a hydraulic booster can provide more assist, which is useful on heavy vehicles or vehicles with larger engines.
  • Vacuum dependency: a hydraulic booster does not depend on engine vacuum, so a vacuum leak or low engine vacuum does not affect it.

Service note from the source material: a used hydro-boost is not a good rebuilding candidate. Its internal clearances are precision parts and one passage is sealed by metal-to-metal contact without rubber seals; wear increases clearance and can push dimensions out of tolerance and cause failure.

Related Products